MS35764F
TABLE II. Length Tolerance.
NOMINAL SIZE |
.250 .3125 .375 |
.4375 .500 |
.5625 .625 .750 |
.875 1.000 |
1.250 |
LENGTH |
TOLERANCE (+.000) |
||||
THRU 1.000 OVER 1.000 THRU 2.500 OVER 2.500 THRU 4.000 OVER 4.000 |
-.030 -.040 -.060 |
-.030 -.060 -.080 |
-.030 -.080 -.100 |
-.100 -.140 -.160 |
-.120 -.160 -.180 |
REQUIREMENTS:
1. MATERIAL: Steel, SAE Grade 8 in accordance with procurement specification.
2. PROTECTIVE COATING: Cadmium plated in accordance with SAE AMS-QQ-P-416, Type II, Class 2.
Zinc phosphate coated in accordance with MIL-DTL-16232, Type Z, Class 2.
3. THREADS: Threads shall be in accordance with FED-STD-H28.
4. DIMENSIONS: All dimensions are in inches.
5. HEAD DIMENSIONS: For head dimensions see procurement specifications.
" 6. UNTHREADED LENGTH: Bolts too short for full thread length shall have threads extending over the full length. The distance from the underside of the head to the first complete (full
form) thread, as measured with a ring thread gage, shall not exceed the maximum unthreaded - body length "N".
7. HEAD MARKINGS: Heads shall be marked on top with the manufacturer's identification and the number 8 to designate Grade 8 material. Raised marking are preferred.
8. PART NUMBER: The MS part number consists of the MS number, plus the dash number.
Example: MS35764-1201.
9. Referenced documents shall be of the issue in effect as of the date of invitation for bid.
10. For design feature purposes, this standard takes precedence over procurement documents referenced herein.
11. Changes from previous issue. Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes.
4
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business