MS9090D
TABLE I - Dash numbers and dimensions
DASH NUMBER |
L |
K +.000 -.060 |
APPROX WEIGHT LBS/100 |
DASH NUMBER |
L |
K +.000 -.060 |
APPROX WEIGHT LBS/100 |
DASH NUMBER |
L |
K +.000 -.060 |
APPROX WEIGHT LBS/100 |
-05 |
.562 |
1/ |
2.21 |
-23 |
1.688 |
.812 |
4.22 |
-41 |
3.875 |
3.000 |
8.17 |
-06 |
.625 |
1/ |
2.28 |
-24 |
1.750 |
.875 |
4.33 |
-42 |
4.000 |
3.125 |
8.40 |
-07 |
.688 |
1/ |
2.39 |
-25 |
1.875 |
1.000 |
4.55 |
-43 |
4.125 |
3.250 |
8.63 |
-08 |
.750 |
1/ |
2.51 |
-26 |
2.000 |
1.125 |
4.77 |
-44 |
4.250 |
3.375 |
8.86 |
-09 |
.812 |
1/ |
2.62 |
-27 |
2.125 |
1.250 |
5.00 |
-45 |
4.375 |
3.500 |
9.08 |
-10 |
.875 |
1/ |
2.73 |
-28 |
2.250 |
1.375 |
5.23 |
-46 |
4.500 |
3.625 |
9.30 |
-11 |
.938 |
1/ |
2.85 |
-29 |
2.375 |
1.500 |
5.45 |
-47 |
4.625 |
3.750 |
9.52 |
-12 |
1.000 |
.125 |
2.96 |
-30 |
2.500 |
1.625 |
5.67 |
-48 |
4.750 |
3.875 |
9.74 |
-13 |
1.062 |
.188 |
3.07 |
-31 |
2.625 |
1.750 |
5.90 |
-49 |
4.875 |
4.000 |
9.95 |
-14 |
1.125 |
.250 |
3.19 |
-32 |
2.750 |
1.875 |
6.13 |
-50 |
5.000 |
4.125 |
10.17 |
-15 |
1.188 |
.312 |
3.30 |
-33 |
2.875 |
2.000 |
6.36 |
-51 |
5.125 |
4.250 |
10.40 |
-16 |
1.250 |
.375 |
3.41 |
-34 |
3.000 |
2.125 |
6.58 |
-52 |
5.250 |
4.375 |
10.63 |
-17 |
1.312 |
.438 |
3.52 |
-35 |
3.125 |
2.250 |
6.80 |
-53 |
5.375 |
4.500 |
10.86 |
-18 |
1.375 |
.500 |
3.64 |
-36 |
3.250 |
2.375 |
7.03 |
-54 |
5.500 |
4.625 |
11.10 |
-19 |
1.438 |
.562 |
3.75 |
-37 |
3.375 |
2.500 |
7.27 |
-55 |
5.625 |
4.750 |
11.33 |
-20 |
1.500 |
.625 |
3.87 |
-38 |
3.500 |
2.625 |
7.50 |
-56 |
5.750 |
4.875 |
11.56 |
-21 |
1.562 |
.688 |
3.98 |
-39 |
3.625 |
2.750 |
7.73 |
-57 |
5.875 |
5.000 |
11.78 |
-22 |
1.625 |
.750 |
4.10 |
-40 |
3.750 |
2.875 |
7.95 |
-58 |
6.000 |
5.125 |
12.00 |
1/ Thread to head. Maximum two incomplete threads.
Requirements:
1. Material: Steel in accordance with SAE-AMS 6322-80.
2. Threads: Threads in accordance with MIL-S-7742. Incomplete threads not to enter fillet.
3. Finish: Cadmium plate in accordance with SAE-AMS 2400-80. Dimensions specified are after plating.
4. Hardness: 26-32 HRC.
5. Dimensioning and tolerancing: Dimensioning and tolerancing shall be in accordance with ASME Y14.5M.
6. Wrenching configuration: Wrenching configuration in accordance with SAE-AS870-74.
7. Surface texture: Surface texture, unless otherwise specified, shall be 125 microinches, except upset head, in accordance with ASME B46.1.
8. Magnetic particle inspection: Magnetic particle inspection shall be in accordance ASTM-E1444.
9. Tolerance: Unless otherwise specified, tolerances shall be for linear dimensions ±.010, angular dimensions ±5°.
10. Edges: Break sharp edges .003 - .015, unless otherwise specified.
11. Part number: The part number shall consist of the basic MS number followed by a dash number from Table I.
Example: MS9090-05
Dash number
Basic MS number
MS9090-05 indicates: Bolt, Machine, Steel Drilled 12 Point Head;
.3125-24 UNF-3A; Length .562.
2
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business