MS9928A
Table I. Dash Numbers and Dimensions.
Part No. |
L |
K |
Approximate Weight LB/100 |
Part No. |
L |
K |
Approximate Weight LB/100 |
-03 -04 -05 -06 -07 -08 -09 -10 -11 -12 -13 -14 -15 -16 -17 -18 -19 -20 -21 -22 -23 -24 -25 -26 -27 -28 -29 -30 |
.750 .812 .875 .938 1.000 1.062 1.125 1.188 1.250 1.312 1.375 1.438 1.500 1.562 1.625 1.688 1.750 1.812 1.875 1.938 2.000 2.125 2.250 2.375 2.500 2.625 2.750 2.875 |
.105- .125 .105- .125 .105- .125 .105- .125 .105- .125 .105- .125 .105- .125 .105- .125 .105- .125 .105- .125 .105- .125 .128- .188 .190- .250 .252- .312 .315- .375 .378- .438 .440- .500 .502- .562 .565- .625 .628- .688 .690- .750 .815- .875 .940-1.000 1.065-1.125 1.190-1.250 1.315-1.375 1.440-1.500 1.565-1.625 |
7.25 7.56 7.86 8.16 8.47 8.77 9.07 9.37 9.67 9.97 10.27 10.57 10.87 11.18 11.49 11.79 12.09 12..40 12.70 13.00 13.31 13.91 14.51 15.11 15.72 16.33 16.93 17.54 |
-31 -32 -33 -34 -35 -36 -37 -38 -39 -40 -41 -42 -43 -44 -45 -46 -47 -48 -49 -50 -51 -52 -53 -54 -55 |
3.000 3.125 3.250 3.375 3.500 3.625 3.750 3.875 4.000 4.125 4.250 4.375 4.500 4.625 4.750 4.875 5.000 5.125 5.250 5.375 5.500 5.625 5.750 5.875 6.000 |
1.590-1.750 1.815-1.875 1.940-2.000 2.065-2.125 2.190-2.250 2.315-2.375 2.440-2.500 2.565-2.625 2.690-2.750 2.815-2.875 2.940-3.000 3.065-3.125 3.190-3.250 3.315-3.375 3.440-3.500 3.565-3.625 3.690-3.750 3.815-3.875 3.940-4.000 4.065-4.125 4.190-4.250 4.315-4.375 4.440-4.500 4.565-4.625 4.690-4.750 |
18.14 18.75 19.35 19.95 20.54 21..17 21.77 22.32 22.98 23.59 24.16 24.79 25.40 26.01 26.61 27.22 27.82 28.43 29.22 29.61 30.24 30.85 31.45 32.05 32.66 |
REQUIREMENTS:
1. Material: Corrosion and heat resistant steel in accordance with AMS 6322.
2. Threads: Threads in accordance with MIL-S-8879. Incomplete threads not to enter fillet.
3. Finish: Cadmium plate in accordance with AMS 2400. Dimensions specified are after plating.
4. Magnetic Particle Inspection: Magnetic particle inspection shall be in accordance with AMS 2640 after plating.
5. Surface Texture: Surface texture in accordance with ANSI/ASME B46.1. Unless otherwise specified, surface to be 125 microinches except upset head.
2
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business