MIL-DTL-45912B
DEPARTMENT OF DEFENSE SPECIFICATIONS
MIL-DTL-16232
Phosphate Coating, Heavy, Manganese or Zinc Base
DEPARTMENT OF DEFENSE STANDARDS
MS35763
Bolt, Self-Locking, Hexagon Head, Steel, Grade 5,
UNC-2A and UNF-2A (Inactive for new design)
MS35764
Bolt, Self-Locking, Hexagon Head, Steel, Grade 8,
UNC-2A and UNF-2A (Inactive for new design)
(Copies of these documents are available online at https://assist.dla.mil/quicksearch/ or
from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia,
PA 19111-5094.)
2.3 Non-Government publications. The following documents form a part of this document
to the extent specified herein. Unless otherwise specified, the issues of these documents are
those cited in the solicitation or contract.
AMERICAN SOCIETY FOR QUALITY (ASQ)
ASQ Z1.4
Sampling Procedures and Tables for Inspection by
Attributes.
(Copies of this document are available from www.asq.org American Society for Quality
Control, 600 North Plankinton Avenue, Milwaukee, WI 53203.)
SOCIETY OF AUTOMOTIVE ENGINEERS (SAE)
SAE AMS-QQ-P-416
Plating, Cadmium (Electrodeposited)
SAE-J429
Fasteners, Externally Threaded, Mechanical and Material
Requirements for
(Copies of these documents are available from www.sae.org or the Society of
Automotive Engineers, Inc., 400 Commonwealth Drive, Warrendale, PA 15096-0001.)
2.4 Order of precedence. Unless otherwise noted herein or in the contract, in the event of a
conflict between the text of this document and the references cited herein, the text of this
document takes precedence. Nothing in this document, however, supersedes applicable laws
and regulations unless a specific exemption has been obtained.
3. REQUIREMENTS
3.1 Material. The bolts shall conform to the material composition of SAE Grade 5 or Grade
8 in accordance with SAE J429.
Composition A SAE Grade 5 (MS35763)
Composition B SAE Grade 8 (MS35764)
3.2 Design. The bolts shall conform to the design, dimensions and tolerances specified on
MS35763 or MS35764 and in Figure 1 and Table I.
3.3 Protective finish. The bolts shall be cadmium plated or phosphate coated as specified
on the applicable Military Standard. Cadmium plating shall conform to the requirements of Type
II, Class 2 of SAE AMS-QQ-P-416. Zinc phosphate coating shall conform to the requirements of
Type Z, Class 2 of MIL-DTL-16232.
2
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business